Racingline

Racingline - DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381

No reviews yet Write a Review
Racingline DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptibl…
SKU: VWR29DQ381
£719.41
icon Share icon Share

Racingline DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381

It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.

The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.

Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

Oil cooler mounting brackets

AN10 210 series Nylon braided feed and return line

Billet CNC thermostatic adaptor block

Replacement, low-profile oil/water cooler

AN10 10-row oil/air cooler core

Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins

The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.

Product Variations

DSG DQ250 6-SPEED VWR29G7250

DSG DQ381 7-SPEED VWR29DQ381

Why fit a DSG Cooler Kit?

Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.

Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.

The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.

Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

ApplicationsPlease note, customers are wholly responsible for checking fitment for their vehicle.

SKU: VWR29DQ381

Categories: Arteon 2017-present, Arteon R 2.0 TSI (284 PS) 2017-present, Audi, Brand, Clutch & Drivetrain, DSG Accessories, DSG Cooling, Golf GTI Performance (245 PS) 2017-present, Golf GTI TCR (290 PS) 2019-present, Golf Mk7/Mk7.5 2012-present, Golf R (300 PS) 2019-2021, Golf R (310 PS) 2017-2019, Leon Cupra 'R' (310 PS) 2017-2018, Leon Cupra 280 (280 PS) 2014-2015, Leon Cupra 290 (290 PS) 2015-2016, Leon Cupra 290 (290 PS) 2018-2020, Leon Cupra 300 (300 PS) 2017-2018, Leon Mk3 2013-2020, Octavia Mk3 (5E) 2013-2020, Octavia vRS (230 PS) 2017-2020, Octavia vRS (245 PS) 2017-2020, Parts, Passat 2.0 TSI GPF 4Motion (272 PS) 2018-present, Passat Mk6 (B8) 2014-present, Racingline Performance, S3 (300 PS) 2018-present, S3 (8V) 2012-2020, Seat, Skoda, TT (8S) 2014-present, TTS (310 PS) 2014-2018, TTS (8S) 2014-present, Volkswagen

This product hasn't received any reviews yet. Be the first to review this product!

Racingline - DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381

£719.41

Description

Racingline DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381

It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.

The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.

Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

Oil cooler mounting brackets

AN10 210 series Nylon braided feed and return line

Billet CNC thermostatic adaptor block

Replacement, low-profile oil/water cooler

AN10 10-row oil/air cooler core

Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins

The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.

Product Variations

DSG DQ250 6-SPEED VWR29G7250

DSG DQ381 7-SPEED VWR29DQ381

Why fit a DSG Cooler Kit?

Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.

Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.

The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.

Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

ApplicationsPlease note, customers are wholly responsible for checking fitment for their vehicle.

SKU: VWR29DQ381

Categories: Arteon 2017-present, Arteon R 2.0 TSI (284 PS) 2017-present, Audi, Brand, Clutch & Drivetrain, DSG Accessories, DSG Cooling, Golf GTI Performance (245 PS) 2017-present, Golf GTI TCR (290 PS) 2019-present, Golf Mk7/Mk7.5 2012-present, Golf R (300 PS) 2019-2021, Golf R (310 PS) 2017-2019, Leon Cupra 'R' (310 PS) 2017-2018, Leon Cupra 280 (280 PS) 2014-2015, Leon Cupra 290 (290 PS) 2015-2016, Leon Cupra 290 (290 PS) 2018-2020, Leon Cupra 300 (300 PS) 2017-2018, Leon Mk3 2013-2020, Octavia Mk3 (5E) 2013-2020, Octavia vRS (230 PS) 2017-2020, Octavia vRS (245 PS) 2017-2020, Parts, Passat 2.0 TSI GPF 4Motion (272 PS) 2018-present, Passat Mk6 (B8) 2014-present, Racingline Performance, S3 (300 PS) 2018-present, S3 (8V) 2012-2020, Seat, Skoda, TT (8S) 2014-present, TTS (310 PS) 2014-2018, TTS (8S) 2014-present, Volkswagen

Customers Also Viewed