034 Motorsport UK - Audi B9 RS4/RS5 2.9 TT - Stage 2 ZF8 TCU Tune
034 Motorsport Dynamic+ AL552 ZF8 stage 2 & 3 TCU tune is now available for your Audi B9/9.5 RS4 & RS5! Dynamic+ tuning for the AL552 ZF8 safely and effectively optimises its operation for stage 1, 2 & 3 performance ECU software. The result is a noticeable improvement in acceleration without sacrificing comfort or reliability.
034 Motorsport stage 1 ZF8 TCU tuning software is included at no extra charge with 034 stage 1 or stage 1.5 B9 RS4/RS5 ECU tune. This is necessary to remove the torque limits within the TCU and is limited on features.We strongly recommend you pair all your ECU tunes with stage 2 TCU for the best driving experience.
034 Motorsport takes a holistic approcach to tuning. By bridging the gap the ECU will report torque values to the TCU to ensure that all safety systems are intact in both control units, and the added torque from tuning is properly adjusted for when driving/shifting, including all safety systems designed to protect the engine and transmission. This results in better shift quality as the transmission is not having to reduce engine torque or having to adapt to misreported inputs.
Stage 2 ZF8 TCU tune
034 Motorsport stage 2 transmission performance tuning software for the Al552 is designed to further improve drivability and performance. Stage 2 TCU software can be used with all stages of software. It can also be used on stock vehicles and vehicles fitted with OPF's.
Stage 2 Dynamic+ tuning for the AL552 ZF8 safely and effectively optimises its operation for performance tuning software. The result is a noticeable improvement in acceleration, dropping your 0-60 time by 0.1 second and increasing shift speeds by up to 70%, without any sacrifice in comfort or reliability.
034 Motorsport Stage 2 TCU Tuning further improves shifting performance and speed for casual and track driving in all driving modes. Dynamic+ Tuning also activates AMAX shifting to ensure the quickest and most efficient shifting strategies while launching your vehicle. These changes result in a significant improvement in acceleration, and lower 0-60 and ¼ mile times.
Features:
Optimized Shift Points
In order to take advantage of the increased powerband from the turbochargers, Dynamic+ Tuning optimizes the shift points in all driving modes to maximize acceleration during wide open throttle scenarios.
Improved Shift Speeds
To further enhance the acceleration of your Audi, the ZF8 shift times are dramatically decreased in all driving modes, which ultimately results in quicker acceleration. Shift times are now up to 70% faster!
Shift pressures are also increased in Sport Mode to maximize performance. In Sport Mode, you will notice less lazy shifts, more firm shifts, which ultimately results in quicker acceleration.
Increased Launch Stall RPM
The launch stall RPM has been raised for a significant increase in force, allowing you to get off the line as fast as possible.
Delay Time Between Launches Reduced
The delay time between launch control activations has been shortened. This is useful when drag racing to heat up tires using launch control, and re-activate quickly before launching down the drag strip!
Improved Torque Management
As with any automatic transmission vehicle, the ECU and TCU computers work synchronously to properly apply torque to the vehicle's drivetrain in a safe and reliable manner. Within both the ECU and TCU, there are factory safety tables that limit overall torque output based upon what the factory first tuned the car for. The ECU reports the output of torque from the engine to the TCU, and the TCU decides if this is suitable, or too much. If it is too much, the TCU will command the ECU to reduce torque output based upon its safety tables.
034Motorsport takes a holistic approach with its Dynamic+ Tuning and aims to retain as many OEM safety protocols as possible. While it is possible to tune around the factory TCU torque limiters from the ECU side, this is done at the expense of torque safety features that are integral in keeping your transmission running safely. 034Motorsport’s calibrators tune the ECU to work with the TCU to provide accurate torque values and recalibrate the appropriate safety ranges for the TCU. Taking these extra steps to retain OEM safety systems on the ECU and TCU side is just one of the many reasons that Dynamic+ software provides substantial yet reliable performance increases.
Dynamic+ end user flash kit allows customers to install ECU & TCU software upgrades themselves, from the comfort of their own driveway. Receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software from your vehicle's OBD2 port. This ECU flashing process is quick and easy, no technical skills are required.
Typical times to flash your TCU is under 20 minutes.
TCU Flashing Directions
Receive welcome email(after purchase) with 034 software account and user guide
Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
Send 034 stock file details from software (very easy)
Plug back into OB2 port & USB and flash tune your ECU / TCU
Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.
The reading / flashing and software process isnot complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
034 Motorsport Flash Portal
For more information visit the034 Motorsport flash portalto download your user manual and 034 motorsport flash software.
Fitment
Make
Model
Years
Chassis
Engine
Audi
RS4
2018+
B9/B9.5
2.9 TFSI
Audi
RS5
2018+
B9/B9.5
2.9 TFSI
How to order
You can choose to have your vehicle remapped at Awesome GTI in Manchester UK. This includes free power runs. If you select this option you do not need to purchase the 034 end user flash kit. If you wish to remap your vehicle at home you need to select an option "with end user flash kit". If you already own a flash kit you can select "no flash kit required".
034 Motorsport UK - Audi B9 RS4/RS5 2.9 TT - Stage 2 ZF8 TCU Tune
034 Motorsport Dynamic+ AL552 ZF8 stage 2 & 3 TCU tune is now available for your Audi B9/9.5 RS4 & RS5! Dynamic+ tuning for the AL552 ZF8 safely and effectively optimises its operation for stage 1, 2 & 3 performance ECU software. The result is a noticeable improvement in acceleration without sacrificing comfort or reliability.
034 Motorsport stage 1 ZF8 TCU tuning software is included at no extra charge with 034 stage 1 or stage 1.5 B9 RS4/RS5 ECU tune. This is necessary to remove the torque limits within the TCU and is limited on features.We strongly recommend you pair all your ECU tunes with stage 2 TCU for the best driving experience.
034 Motorsport takes a holistic approcach to tuning. By bridging the gap the ECU will report torque values to the TCU to ensure that all safety systems are intact in both control units, and the added torque from tuning is properly adjusted for when driving/shifting, including all safety systems designed to protect the engine and transmission. This results in better shift quality as the transmission is not having to reduce engine torque or having to adapt to misreported inputs.
Stage 2 ZF8 TCU tune
034 Motorsport stage 2 transmission performance tuning software for the Al552 is designed to further improve drivability and performance. Stage 2 TCU software can be used with all stages of software. It can also be used on stock vehicles and vehicles fitted with OPF's.
Stage 2 Dynamic+ tuning for the AL552 ZF8 safely and effectively optimises its operation for performance tuning software. The result is a noticeable improvement in acceleration, dropping your 0-60 time by 0.1 second and increasing shift speeds by up to 70%, without any sacrifice in comfort or reliability.
034 Motorsport Stage 2 TCU Tuning further improves shifting performance and speed for casual and track driving in all driving modes. Dynamic+ Tuning also activates AMAX shifting to ensure the quickest and most efficient shifting strategies while launching your vehicle. These changes result in a significant improvement in acceleration, and lower 0-60 and ¼ mile times.
Features:
Optimized Shift Points
In order to take advantage of the increased powerband from the turbochargers, Dynamic+ Tuning optimizes the shift points in all driving modes to maximize acceleration during wide open throttle scenarios.
Improved Shift Speeds
To further enhance the acceleration of your Audi, the ZF8 shift times are dramatically decreased in all driving modes, which ultimately results in quicker acceleration. Shift times are now up to 70% faster!
Shift pressures are also increased in Sport Mode to maximize performance. In Sport Mode, you will notice less lazy shifts, more firm shifts, which ultimately results in quicker acceleration.
Increased Launch Stall RPM
The launch stall RPM has been raised for a significant increase in force, allowing you to get off the line as fast as possible.
Delay Time Between Launches Reduced
The delay time between launch control activations has been shortened. This is useful when drag racing to heat up tires using launch control, and re-activate quickly before launching down the drag strip!
Improved Torque Management
As with any automatic transmission vehicle, the ECU and TCU computers work synchronously to properly apply torque to the vehicle's drivetrain in a safe and reliable manner. Within both the ECU and TCU, there are factory safety tables that limit overall torque output based upon what the factory first tuned the car for. The ECU reports the output of torque from the engine to the TCU, and the TCU decides if this is suitable, or too much. If it is too much, the TCU will command the ECU to reduce torque output based upon its safety tables.
034Motorsport takes a holistic approach with its Dynamic+ Tuning and aims to retain as many OEM safety protocols as possible. While it is possible to tune around the factory TCU torque limiters from the ECU side, this is done at the expense of torque safety features that are integral in keeping your transmission running safely. 034Motorsport’s calibrators tune the ECU to work with the TCU to provide accurate torque values and recalibrate the appropriate safety ranges for the TCU. Taking these extra steps to retain OEM safety systems on the ECU and TCU side is just one of the many reasons that Dynamic+ software provides substantial yet reliable performance increases.
Dynamic+ end user flash kit allows customers to install ECU & TCU software upgrades themselves, from the comfort of their own driveway. Receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software from your vehicle's OBD2 port. This ECU flashing process is quick and easy, no technical skills are required.
Typical times to flash your TCU is under 20 minutes.
TCU Flashing Directions
Receive welcome email(after purchase) with 034 software account and user guide
Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
Send 034 stock file details from software (very easy)
Plug back into OB2 port & USB and flash tune your ECU / TCU
Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.
The reading / flashing and software process isnot complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
034 Motorsport Flash Portal
For more information visit the034 Motorsport flash portalto download your user manual and 034 motorsport flash software.
Fitment
Make
Model
Years
Chassis
Engine
Audi
RS4
2018+
B9/B9.5
2.9 TFSI
Audi
RS5
2018+
B9/B9.5
2.9 TFSI
How to order
You can choose to have your vehicle remapped at Awesome GTI in Manchester UK. This includes free power runs. If you select this option you do not need to purchase the 034 end user flash kit. If you wish to remap your vehicle at home you need to select an option "with end user flash kit". If you already own a flash kit you can select "no flash kit required".
034 Motorsport UK - Audi B9 RS4/RS5 Tuning - Stage 1 & 2 ECU tunes 034 Motorsport Dynamic+ performance ECU & TCU software for your Audi B9 RS4/RS5 is simply incredible! Available for you to...
034 Motorsport UK - Audi B9 S4/S5/SQ5 - Stage 2 ZF8 AL552 TCU Tune * Fits Audi B9 3.0 TFSI S4/S5/SQ5 034 Motorsport is proud to offer Stage 2 and Stage 3 TCU software for B9/B9.5 Audi S4, S5, or SQ5...
034 Motorsport UK - X34 Carbon Fibre Full Intake - Audi B9 RS5 2.9 TFSI Fits all current model Audi B9 RS5 with 2.9 TT petrol engine. MINIMIZING UNNECESSARY FILTER SHROUDING 03
034 Motorsport UK - P34 Cold Air Intake - Audi B9/B9.5 RS4/RS5 2.9TT 034 Motorsport has developed this comprehensive performance intake solution for the turbocharged 2.9 TFSI engine found in the...
